BarkBinder 1 Gallon

• BarkBinder™ creates a durable, yet pliable
  structure for your landscape and is
  highly resistant to wind, washouts and
  erosion.
• BarkBinder™ is EPA-compliant and
  works naturally to bind with mulch and
  wood fibers.
• BarkBinder™ is an easy-to-apply and
  long-lasting liquid which is applied with
  standard spraying equipment.
  

• Seals and Protects your Bark
• Environmentally Safe
• Inhibits Weed Growth
• Safe for Plants & Animals
• Environmentally Safe
• Easy to Apply
• Long Lasting

1. STEP 1: USE THE PROPER MULCH/BARK
   BarkBinder™ works best with medium to small substrates such as mulch, shredded wood fiber and pine needles. Chunk bark chips & large fiber are not recommended.
   
   
2. STEP 2: DILUTION MIXING
   For optimum results, mix BarkBinder™ concentrate at a 4:1 ratio with water.
   
   
3. STEP 3: PLACEMENT
   Be sure to use bark or mulch that is completely dry. Using a common 1 or 5 gallon pump sprayer, spray the diluted mixture of BarkBinder™ over the bark or mulch. Spray approximately 25 ft2 per gallon. After the first coat is applied, a second coat may be applied for increased durability
   .
   Avoid unnecessary foot traffic for 24 - 72 hours

MAINTENANCE & RECOMMENDATIONS

1. Treated areas should withstand normal conditions for 12-24 months before re-mulching or a
   maintenance coat is needed.
   
   
2. If a maintenance coat is needed, mix BarkBinder™ at the standard 4:1 ratio and apply at a rate of approximately 50 ft2 per gallon.