Gator Seal Resealer 5 Gal

    Gator Seal Resealer 5 Gal

    Product Code: GATORRESEALER01

    $363.98 / ea

    Not yet rated
    Please choose a color below
    Qty ea
    Product is Only Available for In-Store Purchasing
    Save your project list for later and share with others by creating an account or signing in.


    • Easier to clean and maintain.
    • Revives look
    • Can be applied over GATOR WET LOOK and SATIN LOOK finishes, keeping original Wet Look or Satin Look finishes

    Helps Resist

    • Corrosion from de-icing salt.
    • Ultraviolet rays effects.
    • Motor oil and grease stains.

    Product Specifications

    Seals Approximately

    Gator Seal Resealer1 US Gal175 sq ft
    Gator Seal Resealer5 US Gal875 sq ft

    Application Instructions for Pavers & Natural Stones

    1. ALWAYS TESTthe product on a small hidden area of approximately 4 sq. ft. (0.4 m2) to ensure the results will meet your expectations.
    2. Before commencing the project ensure that there is no rain forecasted for the next 24 hours.
    3. First clean pavers with Gator Clean products. Remove all oil, grease and rust stains. UseGator Efflorescence Cleanerto thoroughly cleans the surface to ensure a proper Resealer adhesion.
    4. Wait at least 48 hours at a minimum temperature of 60F (15C) and no rain so the Gator Polymeric sand & paver surface are dry.
    5. Apply coat ofGator Seal Resealerusing a foam roller.
    6. Let it dry for 24 hours before using the sealed area.


    1. Pavers should only be sealed 60 days after their installation date.
    2. Pavers & jointing sand MUST be 100% dry.
    3. Temperature should be between 60F (16C) to 85F (29C) when sealer is applied.
    4. Paver Surface temperature should be between 60F (16C) to 85F (29C) and paver and stone surface must be cool to the touch when sealer is applied.
    5. GATOR EFFLORESCENCE CLEANER removes ground in dirt from the surface of concrete pavers and
      natural stones. It will make the pavers, patio slabs, walls & natural stones look clean and vibrant. Applying GATOR EFFLORESCENCE CLEANER before a GATOR SEAL RESEALER application will assure you of a deeper penetration into the cleaned surface.
    6. Just use 1 layer ofGATOR SEAL RESEALER
    7. When using Gator Seal assure yourself at least 48 hours of dry conditions prior to applying the resealer.If temperature is above 60F (16C) the surface should dry within hours.
    *Please store container at above 0C / 32F.
    Customers Who Viewed This Product Also Viewed