Coverages:

• 1 can = 600 linear feet with a 3/8" bead

Cure Time:

• 3-7 days full cure
• 10 minute working time

Storage & Shelf Life:

• 15 months shelf life unopened
• Store canister upright
• Do not puncture, incinerate or store above 120°F (48.9°C)

Storage with Dispenser Gun (After Each Use) :

• If there is still product in the canister:
  • Close the valve of the dispenser gun and leave the canister on the dispenser gun until the next job
• If the canister is empty:
  • Remove canister from the dispenser gun to avoid adhesive from drying and clogging the dispenser gun. This may render the dispenser gun unusable
  • Screw new SF-8™ canister onto the dispenser gun and continue using if necessary. If dispenser gun is to be stored away, pull the trigger for a few seconds to make sure the dispenser gun is filled with new adhesive. Extrude adhesive at least every 2 weeks from canister to prevent curing within dispenser gun
  • For optimal performance, screw a canister for SF-8™ Cleaner to the dispenser gun to pull the trigger to clean the dispenser gun thoroughly, before adding a new SF-8™ canister

Cleaning:

• When attaching SF-8™ Cleaner to dispenser gun spray cleaner until residue comes out clear
• Allow cleaner to remain in dispenser gun for roughly 15 minutes
• Always remove SF-8™ Cleaner from dispenser gun and apply a new SF-8™ adhesive canister
• A spray nozzle is included with the cleaner for spot cleaning on the job site for quick and easy cleaning without having to load the cleaner onto the dispenser