Skip to the beginning of the images gallery

Gator Seal Natural Look (5 Gal)

Name: Gator Seal Natural Look (5 Gal)
SKU: GATORSEAL03
Price: 584.98 USD
Availability: InStock

Product Code

GATORSEAL03

Rating:

% of 100

Reviews Write A Review

| Write A Review

Coverage

175 sq ft per 1 U.S. gal.

Gator Seal Signature Series Natural Look is made from fluorochemical polymers. This sealer penetrates deep into the concrete pavers, walls, masonry and natural stones, therefore helps prevent the oil and dirt penetration, corrosion from de-icing salt, the effects from the UV rays and stains up of to 10 years.

Have a question about this product or need assistance? Send Us a Message

$584.98

/ Each

Coverage

175 sq ft per 1 U.S. gal.

Quantity

How to Get It?

In-Store Pickup

Not available for this item
Boxed Shipment to Home or Jobsite

Not available for this item
Local Delivery via Flatbed Truck

Not available for this item
Local Delivery via Dump Truck

Not available for this item

login_icon6 For easy returns in store and online read our Return Policy

Description

Application Instructions

Please Note:

Concrete pavers should only be sealed 60 days after their installation date. Consult concrete paver manufacturers for their recommendation.
Temperature should be between 32°F (0°C) and 85°F (29°C) when sealer is applied.
Concrete paver surface must be cool to the touch when sealer is applied (between 32°F (0°C) and 85°F (29°C)).
First clean concrete pavers with Gator Clean products. Remove all oil, grease and rust stains.
Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
Use just one (1) coat of sealer.
Gator Seal Signature Series Natural Look can be applied on dry or damp surfaces.
Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer.
Wear protective gloves, eye protection and respiratory protection.

STEP 1

A.) Always refer to the Gator Seal Signature Series Natural Look Technical Data Sheet (See Documents tab), before installing.

B.) Always test the product on a small hidden area of approximately 4 sq ft, to ensure the results will meet your expectations

STEP 2

Remove all the stains from the concrete pavers, using Gator Clean products. Use Gator Sealer Stripper to remove any unknown coating that remains on the concrete paver surface.

STEP 3

Remove all contaminated jointing material and replace with Gator Polymeric Sand. Follow the instructions on the back of the bags for proper sand installation.

STEP 4

Wait at least 48 hours at a minimum temperature of 32°F (0°C) and no rain for the Gator Polymeric Sand to properly harden.

STEP 5

Clean the entire surface with the Gator Efflorescence Cleaner. This product will remove the efflorescence trapped in the concrete paver pores as well as thoroughly clean the surface for proper sealer adhesion.

STEP 6

Wait at least 48 hours at a minimum temperature of 32°F (0°C) and no rain so the sand and concrete paver surface are dry.

STEP 7

Best Practice: Apply one (1) coat of Gator Seal Signature Series Natural Look using a sprayer in 60 sq. ft. (5.6 sq. m.) sections, then use a water base (yellow) foam roller to remove the excess sealer left on the surface.