This product is only available for in-store selection and purchasing. 
Wait at least 48 hours at a minimum temperature of 32°F (0°C) and no rain for the Gator Polymeric Sand to properly harden.
In stock
SKU
GATORSEAL51
Gator Seal Natural Stone (5 Gal)
For easy returns in store and online read our Return Policy
-
In-Store Pickup
Not available for this item -
Boxed Shipment to Home or Jobsite
Not available for this item -
Local Delivery via Flatbed Truck
Not available for this item -
Local Delivery via Dump Truck
Not available for this item
Coverage
| Surface Type | Format | Approximate Surface Sealed |
| Granite | 1 gallon (3.78 L) | 400-600 sq ft |
| Travertine | 1 gallon (3.78 L) | 500-700 sq ft |
| Limestone | 1 gallon (3.78 L) | 300-500 sq ft |
| Sandstone | 1 gallon (3.78 L) | 200-400 sq ft |
| Bluestone | 1 gallon (3.78 L) | 200-400 sq ft |
Â
Informational Video
| In Store Only | No |
|---|---|
| Bistrack Productcode | GATORSEAL51 |
| Bistrack ProductId | 2639 |
| Ships Via - Store Pickup | Yes |
| Ships Via - UPS Package | No |
| Ships Via - Flatbed Truck | Yes |
| Ships Via - Dump Truck | No |
| High volume | No |
Application Instructions
Please Note:
- Natural stones should only be sealed 60 days after their installation date. Consult natural stone manufacturer’s for their recommendation.
- Natural stones and jointing sand MUST be 100% dry.
- Temperature should be between 50°F (10°C) and 80°F (27°C) when sealer is applied.
- Natural stone surface must be cool to the touch when sealer is applied (ambient temperature between 50°F (10°C) and 80°F (27°C)).
- First clean natural stones with Gator Clean products. Remove all oil, grease and rust stains.
- Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
- Use just one (1) layer of Gator Seal Signature Series for Natural Stone with Color Enhancer.
- When using Gator Seal Signature Series for Natural Stone with Color Enhancer, assure yourself at least 48 hours of dry conditions prior to applying the sealer.
- Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer
- Wear protective gloves, eye protection and respiratory protection.
- Always keeps surfaces dry and clean to reduce slip-fall accidents. This sealer is not anti-slip. Precautions should be taken around pools and showers.
- Do not let it dry (white film or slippery residue may form). If not wiped dry after 5-10 minutes, residu may form. Do not pressure-wash. Not resistant from acids or caustic chemicals. Do not dilute. Not for food handling surfaces. Not for glazed tile or non-porous surfaces. Apply between 50-80°F (10-27°C). Dry residue after a long period may be removed by adding more sealer or mechanically.
STEP 1
A.) Always refer to the Gator Seal Signature Series Natural Stone Technical Data Sheet (See Documents tab), before installing.
B.) Always test the product on a small hidden area of approximately 4 sq ft, to ensure the results will meet your expectations
STEP 2
Remove all the stains from the concrete pavers, using Gator Clean products. Use Gator Sealer Stripper to remove any unknown coating that remains on the concrete paver surface.
STEP 3
Remove all contaminated jointing material and replace with Gator Polymeric Sand. Follow the instructions on the back of the bags for proper sand installation.
STEP 4
STEP 5
Clean the entire surface with the Gator Efflorescence Cleaner. This product will remove the efflorescence trapped in the concrete paver pores as well as thoroughly clean the surface for proper sealer adhesion.
STEP 6
Wait at least 48 hours at a minimum temperature of 32°F (0°C) and no rain so the sand and concrete paver surface are dry.
STEP 7
Dry surface for 24 hrs prior to apply sealer. Apply one (1) coat of Gator Seal Signature Series Natural Stone with Color Enhancer using a sprayer (HVLP), nap roller (1/4″-3/8″ (5-10 mm)), squeegee, sponge or rag. Apply in 60 sq. ft. (5.6 sq. m.) sections at a time. Use a nap roller or squeegee to remove excess sealer from the surface. Allow remaining sealer to penetrate 5-10 minutes. Wipe and remove any excess sealer with clean, dry, lint-free cotton cloths. Repeat after 30 minutes if not well sealed (make the test with a drop of water).
STEP 8
Gator Seal Signature Series Natural Stone with Color Enhancer is water repellant, rain safe, after 24 hours.
STEP 9
Let the sealer dry for 24 hours before using the sealed area.
Note: Alliance Designer Products shall not be liable for any non-compliant use.
3-Piece: Pattern 1
3-Piece: Pattern A
3-Piece: Pattern B
Interior Space
Meet the Arizona River Boulders : the boulder behemoths that aren’t just here to play—they’re here to dominate your landscape. These massive marvels are the granddaddies of the rock world, bringing all the swagger and style you could ever need.
Interior Space
Meet the Arizona River Boulders : the boulder behemoths that aren’t just here to play—they’re here to dominate your landscape. These massive marvels are the granddaddies of the rock world, bringing all the swagger and style you could ever need.
Interior Space
Meet the Arizona River Boulders : the boulder behemoths that aren’t just here to play—they’re here to dominate your landscape. These massive marvels are the granddaddies of the rock world, bringing all the swagger and style you could ever need.
Projects Using this Product
Projects Worth a Look
Why Us?
See why contractors, builders, and homeowners turn to Whiz-Q Stone. From top-tier materials to expert support and a selection that fits every project, we’re here to help you get it done right.
Quality Materials
We carefully source our materials for quality and long-lasting performance, so you can feel confident in what you’re building.
Trusted Guidance
Our team is here to support you with knowledgeable guidance and helpful recommendations tailored to your project.
Something for Every Project
From small DIY projects to large commercial builds, our wide selection has you covered.